Schlage ND80BD Heavy Duty Storeroom Function Lever Lock, SFIC Prep
The Schlage ND80BD Heavy Duty Storeroom Function Lever Lock is available from A&A Safe, Lock, & Door with the following options:
- Small Format I/C Core (Best Style) Prep, Less Core
- Accepts 6 and 7 Pin SFIC cores (not included)
- All ND-Series lever locksets are non-handed.
- For use on 1 5/8” to 2 1/8” thick doors. Spacers are required for 1 3/8” doors (not included)
- 2 3/4” Backset Latch included
- 1/2" Latchbolt throw
A&A Safe, Lock, & Door features the lever lock you need fast and at great prices! Learn more about the Schlage ND80BD below and place an order online today on aaofga.com.
- Outside lever is fixed.
- Entrance by key only.
- Inside lever always unlocked.
All ND-Series lever locksets are non-handed.
1 5/8" to 2 1/8" (41mm–54mm) standard including Vandlgard® functions. 1 3/4" - 2" for function ND85. See accessories for spacers required for 1 3/8" doors.
2 3/4" (70 mm) standard. 2 3/8", 3 3/4" and 5" (60 mm, 95 mm, 127 mm) optional.
Brass, bronze or stainless steel. 1 1/8" x 2 1/4" (29 mm x 57mm) square corner, beveled.
Zinc plated for corrosion resistance.
Steel, 1/2" (12mm) throw, deadlocking on keyed and exterior functions. 3/4" (19 mm) throw anti-friction latch available for pairs of fire doors.
Levers: Pressure cast zinc, plated to match finish symbols.
Roses: Brass, bronze or zinc.
ANSI curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard. Optional strikes, lip lengths and ANSI strike box available. See page 21.
Cylinder & Keys:
6-pin Everest 29 S123 keyway standard with two patented nickel silver keys per lock.
Interchangeable core and Primus high security cylinders. Master keying, grand master keying and construction keying.
Ten-year limited for all functions including Vandlgard.
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code.
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2" (64mm) returns comply; Schlage levers return to within 1/2" of door face.
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).
All levers with less than 1/2" (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4" and 1/2" throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4' x 8'. Letter F and UL symbol.
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act.